RCF MB15N351 8/ohm

Detailní popis produktu

Reproduktor 15", 650W, 100dB, 40-3000Hz, X-max 5,5mm, hmotnost 5,0kg

This MB15N351 is designed to provide an excellent linearity in the frequency response with low distortion. The transducer is built around a very stronger neodymium magnetic structure and a new 3,5” voice coil, this combination provides to increase the power handling especially in comparison a standard 3" voice coil. The unique Dual-forced air venting system guarantee a very efficient voice coil ventilation for minimize the power compression at the higher power handling.

Features:

• 3.5-inch, inside/outside copper voice coil
• 1300W continuous program power handling
• 100 dB Sensitivity
• 40 Hz – 3 kHz Frequency range
• Dual-forced air ventilation for minimum power compression
• Dual spider design with silicon based dampening control


General Specifications:

• Nominal Diameter: 380/15 mm/inch
• Rated Impedance: 8 ohm
• Program Power: 1300 W AES
• Power handling capacity: 650 W AES
• Sensitivity: 100 dB
• Frequency Range: 40 Hz ÷ 3000 Hz
• Effective Piston Diameter: 330 / 13 mm/inch
• Max Excursion Before Damage (peak to peak): 39 / 1.5 mm/inch
• Minimum Impedance: 6.8 ohm
• Voice Coil Diameter: 87 / 3.4 mm/inch
• Voice Coil Material: Copper
• Voice Coil Winding Depth: 16.5 / 0.65 mm/inch
• Number of layers: 2
• Kind of layer: inside/outside
• Top Plate Thickness: 11 / 0.43 mm/inch
• Cone Material: No pressed pulp
• Cone Design: Curved
• Surround Material: Polycotton
• Surround Design: M - roll


Thiele/Small Parameters:

• DC resistance: 5.6ohm
• Mechanical factor: 4.0
• Electrical factor: 0.24
• Total factor: 0.22
• BL Factor: 22.5 T · m
• Effective Moving Mass: 80 g
• Equivalent Cas air load: 191 liters
• Effettive piston area: 0.0855 m2
• Max. linear excursion (mathematical): 5.5 mm
• Voice - coil inductance @ 1kHz: 1.65 mH
• Half-space efficiency: 5.68%


Mounting information:

• Overall Diameter: 393 / 15.5 mm/inch
• Bolt Circle Diameter: 371-376 / 14.6-14.8 mm/inch
• Bolt Hole Diameter: 6.5 / 0.3 mm/inch
• Front Mount Baffle Cut-out: 354/13.9 mm/inch
• Rear Mount Baffle Cut-out: 354 / 13.9 mm/inch
• Depth: 164 / 6.4 mm/inch Volume occupied by the driver: 3.8 / 0.13 liters/ft3
• Net Weight: 5.0 / 11.0 kg/lbs


Shipping information:

Shipping weight: 5.8 / 12.7 kg/lbs