Shaman MP-50 MultiPower Isolated Power Supply for Effect Pedals

Voltage-Stabilized Power Supply for Effect Devices!

Powering effect pedals & co. is often trickier than expected. Battery-powered devices usually run out of batteries just when you don’t have a spare (the cautious musician, on the other hand, owns a whole drawer full of half-used batteries). Or there’s at least one less power outlet on stage than needed. With Shaman’s power supplies and devices, professional power management becomes easier and more flexible than ever before!

Shaman MP-50

The MP-50 MultiPower power supply powers up to 10 devices. Eight outputs provide 9 volts (7x 100 mA, 1x 500 mA), while the other two outputs deliver 12V (100 mA) and 18V (100 mA). A blue control LED per channel indicates whether voltage is actually present, and all LEDs can be switched off if desired. Besides a 3.5 mm jack adapter, the MP-50 also includes a reverse cable that can invert the polarity if needed.

Stabilized Power Distributor

Now you only need a single power outlet to supply up to 10 devices with 9, 12, or 18 volts DC. Depending on the version, the individual outputs deliver between 100 and 500 mA! Even power-hungry effect devices get their full share here. The voltage-stabilized DC outputs deliver the same voltage regardless of power consumption or fluctuating load, keeping all connected effects at the same operating point and sounding perfect every time.

Plug Concept

All systems use the same connector: 5 mm outer diameter, 2.1 mm inner diameter, negative center pin. This makes them compatible with all common (floor) effect devices. For exotic gear, each set includes a 3.5 mm jack adapter.

Isolated Outputs

All DC outputs have no ground connection between them, making the power supply as high-quality as using multiple individual high-end plug-in power supplies. Ground loops and annoying noise caused by interconnected grounds are minimized. This lets you fully focus on your sound.

Professional Power Management by Shaman!